LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Chime/Buzzer/Driver Assist (Service Information) >> Camera, Surround View >> Removal And Installation >> Side Camera >> Removal

Side Camera: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the appropriate side mirror glass. Refer to MIRROR, OUTSIDE REARVIEW, GLASS, REMOVAL AND INSTALLATION .
    GC0177910Courtesy of CHRYSLER GROUP, LLC
  3. Remove mirror housing fasteners (1).
  4. Remove the lower surround view camera retaining bolt (2).
    GC0177649Courtesy of CHRYSLER GROUP, LLC
  5. Remove the upper mirror shell (1) to remove the mirror blinker lamp (2).
    GC0177816Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect the wire harness connector (2) from the surround view mirror.
  7. Remove the surround view camera from the mirror housing (1).
scientia non olet · About LEMON Manuals