Side Camera: Installation
- Install the surround view camera to the camera housing (1).
- Connect the wire harness connector (2) to the surround view camera.
- Assemble the turn signal lamp (2) to the housing and position the upper cover (1).
- Install the fasteners (1) to the upper mirror housing and tighten securely.
- Install the surround view camera and fastener (2) to the housing and tighten securely.
- Install the mirror glass. Refer to MIRROR, OUTSIDE REARVIEW, GLASS, REMOVAL AND INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
- Perform the camera calibration procedure. Refer to MODULE, CENTRAL VISION PROCESSING (CVPM), MODULE PROGRAMMING .
