LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Hands Free Sliding Door >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the appropriate side power sliding door sill cladding. Refer to CLADDING, BODY, SILL, REMOVAL AND INSTALLATION .
    GC0177208Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wiring harness connection (1) Power Sliding Door Hands Free Entry (PSDHFE) connector.
    GC0177978Courtesy of CHRYSLER GROUP, LLC
  4. Remove the screws (1) securing the HFEPSD sensor and module to the vehicle.
    GC0178312Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the wiring harness connections (3) from the HFEPSD module (2).
  6. Remove the fasteners (1, 4) securing the HFEPSD module to the sensor assembly.
  7. Remove the HFEPSD module from the sensor assembly.
scientia non olet · About LEMON Manuals