LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Memory Seat (MSM) >> Removal And Installation >> Driver Seat >> Installation

Driver Seat: Installation

GC0177511Courtesy of CHRYSLER GROUP, LLC
  1. Align and position the MSM (1) to the seat bottom.
  2. Engage the MSM tabs to the seat bottom, securing the module to the bottom of the seat. Align the rear tabs first and then flush the module to the seat by engaging the front module tab to the seat bottom.
    GC0178378Courtesy of CHRYSLER GROUP, LLC
  3. Connect the wiring harness connections (1) to the MSM (2).
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), Connect the IBS connector.
  5. Perform the Power Seat System Verification test. Refer to POWER SEAT SYSTEM VERIFICATION TEST .
scientia non olet · About LEMON Manuals