LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Body & Frame >> Seats >> Heated/Cooled Accessories (Service Information) >> Pad, Vented Seat >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING:

Disable the airbag system before attempting any component diagnosis or service of the front seats, when equipped with front seat air bags. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to follow these instructions may result in accidental airbag deployment and possible serious or fatal injury.

  1. Remove the seat cover and cushion. Refer to REMOVAL .
  2. The vented seat pad is glued to the seat cushion. Carefully peel the vented seat pad from the cushion.
scientia non olet · About LEMON Manuals