LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Body & Frame >> Seats >> Heated Seats >> Switch, Heated Seat >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Using Trim Stick (special tool #C-4755, Trim Stick) or equivalent, gently pry the upper edge of the 2nd row heated seat switch bezel away from the sliding door trim panel.
  3. Once the upper edge is free from the trim panel, rock the switch and bezel out of the sliding door trim panel opening.
  4. Disconnect the heated seat switch wire harness connector.
  5. From the back side of the switch bezel, gently pry the switch free from the bezel.
scientia non olet · About LEMON Manuals