Axle Seal Installation

NOTE:

Clean the seal bore in the transmission housing with a clean lint-free cloth.

Apply assembly lube on the lip of the NEW seal to avoid damage after installation.

Courtesy of CHRYSLER GROUP, LLC

NOTE:
Right side shown in illustration, left side similar.
Using tool (special tool #10506, Installer, Oil Seal) 10506 (2) and (special tool #C-4171, Driver Handle, Universal) (1) with the seal (3) positioned on the installer, insert the seal in the transmission bore around the output shaft.

Courtesy of CHRYSLER GROUP, LLC
Using a suitable hammer, drive the seal into the transmission until it is seated.
Install the halfshaft. Refer to REMOVAL AND INSTALLATION .
Verify that the transmission fluid is at the proper level. Refer to FLUID AND FILTER, STANDARD PROCEDURE .