Transmission Fluid Filter Installation
- Clean the intermediate support plate in preparation for the NEW
fluid filter.
- Verify that the O-ring (3) is in good condition. Replace the O-ring (3) if damage is present.
- Insert the oil filter neck (3) into the oil pump orifice and align the bolt hole with the bore in the intermediate support plate (2).
- Install the bolt (2) to hold the fluid filter (1) to the intermediate support plate and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Install the fluid tube (1) from the intermediate support plate and bellhousing and use NEW O-rings (2).
- Install the bellhousing on the transmission. Refer to BELLHOUSING, REMOVAL AND INSTALLATION .
- Install the transmission in the vehicle. Refer to REMOVAL AND INSTALLATION .
