Axle Seal Removal

Remove the halfshaft from the vehicle. Refer to REMOVAL AND INSTALLATION .

Courtesy of CHRYSLER GROUP, LLC

NOTE:
Left side shown in illustration, right side similar.

NOTE:
Keep the punch tool in the center of the seal to avoid damage to the transmission housing.
Using a suitable punch tool (1) and hammer, punch a hole in the metal armature inside the seal (2).

Courtesy of CHRYSLER GROUP, LLC
Thread the sheet metal screw of the dent puller (2) into the seal (1).
Tap outward on the slide hammer (2) until the seal (1) comes out of the seal bore.