Second Row Outboard: Installation

Courtesy of CHRYSLER GROUP, LLC

Position the second row outboard seat belt and retractor (6) to the bracket (4) on the inner body quarter panel as a unit.
Install the fastener (5) that secures the retractor (6) to the bracket (4) on the inner body quarter panel and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
Position the seat belt turning loop (3) to the C-pillar height adjuster (2). Be certain the seat belt webbing between the retractor and the turning loop is not twisted.
Install the fastener (1) that secures the turning loop (3) to the C-pillar height adjuster (2) and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .

Courtesy of CHRYSLER GROUP, LLC
Install the trim cover (1) over the fastener for the seat belt turning loop (3).

Courtesy of CHRYSLER GROUP, LLC
Position the second row outboard seat belt lower anchor (1) near the base of the C-pillar. Be certain the seat belt webbing between the turning loop and the lower anchor is not twisted.
Install the fastener (2) that secures the lower anchor (1) near the base of the C-pillar and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
Install the appropriate left or right quarter trim panel. Refer to PANEL, QUARTER TRIM, REMOVAL AND INSTALLATION .