LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> Heating & Air Conditioning (Service Information) >> Controls, Rear >> Module, Power, Rear Blower Motor >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0178054Courtesy of CHRYSLER GROUP, LLC
  1. Position the rear blower motor power module (3) into the HVAC housing. Make sure the module retaining tabs are fully engaged to the housing.
  2. Install both of the blower motor module to HVAC housing bolts (2). Tighten the bolts securely.
  3. Connect both of the blower motor module wire harness connectors (1).
  4. Install the right quarter trim panel. Refer to PANEL, QUARTER TRIM, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals