LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> A/C Compressor >> Heating & Air Conditioning (Service Information) >> Controls, Front >> Sensor, Temperature, Air Outlet >> Removal And Installation >> Upper Left >> Removal

Upper Left: Removal

WARNING:

To avoid serious or fatal injury on vehicles equipped with airbags, disable the Supplemental Restraint System (SRS) before attempting any steering wheel, steering column, airbags, airbag curtains, knee blocker, seat belt tensioner, impact sensor or instrument panel component diagnosis or service. Disconnect the Intelligent Battery Sensor (IBS)/negative battery cable assembly from the negative battery post, then wait two minutes for the system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the SRS. Failure to take the proper precautions could result in accidental airbag deployment.

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the instrument panel without the HVAC housing. Refer to PANEL, INSTRUMENT, REMOVAL AND INSTALLATION .
    GC0177736Courtesy of CHRYSLER GROUP, LLC
  3. Remove the air duct temperature sensor (1) from the HVAC housing by rotating the sensor counter-clockwise out of the housing.
scientia non olet · About LEMON Manuals