Removal And Installation: Downstream: Installation

LEFT SIDE 

Courtesy of CHRYSLER GROUP, LLC

1. If reinstalling the original oxygen sensor, coat the sensor threads with an anti-seize compound such as Loctite 771- 64 or equivalent. New sensors have compound on the threads and do not require an additional coating. Do Not add any additional anti-seize compound to the threads of a new oxygen sensor. 
2. Install the left side oxygen sensor (2) and tighten to the proper torque specifications. Refer to FUEL INJECTION, GAS, TECHNICAL SPECIFICATIONS .
3. Connect the left side oxygen sensor wire harness connector (1).
4. Install the belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION or BELLY PAN, FRONT, REMOVAL AND INSTALLATION .
5. Remove the support and lower the vehicle.
6. Connect the negative battery cable.

RIGHT SIDE 

1. If reinstalling the original oxygen sensor, coat the sensor threads with an anti-seize compound such as Loctite 771- 64 or equivalent. New sensors have compound on the threads and do not require an additional coating. Do Not add any additional anti-seize compound to the threads of a new oxygen sensor. 

   Remove the belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION or BELLY PAN, FRONT, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

2. Install the right side oxygen sensor (2) and tighten to the proper torque specifications. Refer to FUEL INJECTION, GAS, TECHNICAL SPECIFICATIONS .
3. Connect the right side oxygen sensor wire harness connector (1).
4. Install the belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION or BELLY PAN, FRONT, REMOVAL AND INSTALLATION .
5. Remove the support and lower the vehicle.
6. Connect the negative battery cable.