Standard Procedure - Transmission Cooler Line Quick Connect Fitting Disassembly/Assembly: Connect

Courtesy of CHRYSLER GROUP, LLC

1 - QUICK CONNECT FITTING

2 - CLIP

3 - OIL COOLER LINE

4 - DUST CAP

1. Align the transmission cooler line (3) with the quick connect fitting (1) while pushing the line straight into the fitting.
2. Push in on transmission cooler line until a "click" is heard or felt.
3. Slide the dust cap (4) down the transmission cooler line and snap it over the quick connect fitting until it is fully seated and rotates freely. The dust cap will only snap over the quick connect fitting when the transmission cooler line is properly installed.

NOTE:

If the dust cap will not snap into place, repeat assembly step #2.