Removal And Installation: Removal
CAUTION:
Do not let the tensioner arm snap back to the freearm position, severe damage may occur to the tensioner.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the tire and wheel assembly.
- Remove the wheel house splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL AND INSTALLATION .
- Drain the cooling system. Refer to STANDARD PROCEDURE .
- Remove the lower bypass hose (1) and the lower radiator hose (2).
- Rotate the belt tensioner (1) until it contacts its stop.
- Remove the serpentine belt, then slowly rotate the tensioner into the free position.
