Preliminary Checks

1. Close the sliding door, visually checking C-pillar striker alignment entry into latch. Striker at this point must not affect alignment. Striker should go straight into the latching mechanism.
2. For the left sliding door, check the fuel door blocker striker entry into latch. Striker at this point must not affect alignment.
3. Check C-pillar and B-pillar for door to aperture gaps and door to door gaps. All gaps should be 5 mm ± 1 mm.
4. Check door for height using character lines as a reference. Also check roof contour as a controlling factor.

Using the procedures noted below, adjust the side door in the order the individual steps are called out.