Removal And Installation: Removal
NOTE:
Exterior nameplates are attached to body panels with adhesive tape.
- Apply a length of masking tape on the body, parallel to the top edge of the nameplate to use as a guide, if necessary.
- If temperature is below 21°C (70°F), warm emblem with a heat lamp or gun. Do not exceed 52°C (120°F) when heating emblem.
- Insert a plastic trim stick or a hard wood wedge behind the emblem to separate the adhesive backing from the body.
- Clean adhesive residue from body with MOPAR® Super Kleen solvent or equivalent.