Removal And Installation: Installation
- Align the C-pillar trim panel (3) to the seat belt height adjuster bezel and body side, then hand tap to engage the retaining clips.NOTE:
Move the seat belt height adjuster up and down to check that it works properly. If is does not work properly, remove the C-pillar trim panel and align the seat belt height adjuster bezel.
- Install the screw (2) and tighten securely. Install the screw cover (1).
- Engage the quarter trim panel to the C-pillar trim panel and body side.
- Install the seat belt turning loop bolt and cover. Refer to RETRACTOR, SEAT BELT, REMOVAL AND INSTALLATION
.
- Install the C-pillar extension trim panel (1).
- Install the screw (3) and tighten securely.
- Install the scuff plate extension (1).
