Removal And Installation: Removal
- Open sliding door.
- Remove the lower B-pillar trim, Refer to PANEL, B-PILLAR TRIM, LOWER, REMOVAL AND INSTALLATION .
- Using a grease pencil or equivalent, mark the position of the hinge assembly on the door to aid installation.
- Remove the nuts (1) and separate the hold open latch (3) and cable (2) from the hinge assembly.
- Support sliding door on a suitable lifting device with a padded upper surface. The door must be moveable with lifting device in place.
- Remove the bolts (1) and separate the hold open latch striker (3) from the mounting plate (2).
- Remove the bolt (1) and separate the drive plate (2) from the hinge assembly, if equipped.
- Remove the bolts (1) and separate the hinge assembly (2) from the door.
- Slide the hinge out the rear of the lower track and remove the hinge assembly.
