Removal And Installation: Removal

Courtesy of CHRYSLER GROUP, LLC

Position the glass in the full up position.
Open the door and remove the rear latch assembly bolts (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the interior handle. Refer to HANDLE, INTERIOR, REMOVAL AND INSTALLATION .
Disconnect the wire harness connector (3).
Open the cable covers (1) and disconnect the control cables. Refer to CABLE, HOLD OPEN LATCH, REMOVAL AND INSTALLATION .
Remove the four bolts (2).

Courtesy of CHRYSLER GROUP, LLC
Separate the carrier plate assembly from the door, move the assembly rearward in the door and remove the latch presenter assembly (1) from the door interior (2) with the carrier plate.