LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body - Interior & Exterior >> Doors - Sliding >> Plate, Carrier Rear >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0177242Courtesy of CHRYSLER GROUP, LLC
  1. Position the latch presenter assembly (1) back into the door cavity (2) and install the carrier plate assembly.
    GC0178224Courtesy of CHRYSLER GROUP, LLC
  2. Install the four bolts (2) and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  3. Connect the wire harness connector (3).
  4. Connect the cables (1). Refer to CABLE, FRONT LATCH, REMOVAL AND INSTALLATION  or CABLE, HOLD OPEN LATCH, REMOVAL AND INSTALLATION  or CABLE, INSIDE HANDLE, REMOVAL AND INSTALLATION  or CABLE, LOCK, REMOVAL AND INSTALLATION  or CABLE, OUTSIDE HANDLE, REMOVAL AND INSTALLATION .
    GC0178303Courtesy of CHRYSLER GROUP, LLC
  5. Install the rear latch mounting screws (1) and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  6. Install the interior handle. Refer to HANDLE, INTERIOR, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals