Removal And Installation: Installation

Courtesy of CHRYSLER GROUP, LLC

Before proceeding with the following repair procedure, review all warnings and cautions. Refer to SEATS, FIRST ROW, WARNING .
Position the seat cover (3) to the seat foam and engage the clip strips (2).
Pull the seat cover tight and engage the hook and loop fasteners (1).

Courtesy of CHRYSLER GROUP, LLC
Position the seat back foam assembly to the seat back frame and connect the wire harness connector (1).

Courtesy of CHRYSLER GROUP, LLC
Install the seat air bag into the chute (1) and connect the wire harness connector (2).

Courtesy of CHRYSLER GROUP, LLC
Install the seat air bag into the seat back frame, following all warnings and cautions. Refer to AIR BAG, SEAT, REMOVAL AND INSTALLATION .

Courtesy of CHRYSLER GROUP, LLC
Install the plastic frame (2) and the six screws (1).

Courtesy of CHRYSLER GROUP, LLC
Engage the ventilation pad (2) to the ventilation fan (1), if equipped. Make sure it is engaged fully.

Courtesy of CHRYSLER GROUP, LLC
Install the headrest sleeves (1).
For seats with back panel, fasten the J-hook retainers (3) and install the push fasteners (2).
For seats without a back panel, close the side zippers and fasten the J-hook retainers.
Install the front seat back. Refer to SEAT BACK, FRONT, REMOVAL AND INSTALLATION .
Install the front seat back panel, if equipped. Refer to PANEL, SEAT BACK, FRONT, REMOVAL AND INSTALLATION .
Install the armrest. Refer to ARMREST, FRONT, REMOVAL AND INSTALLATION or ARMREST, REAR, WITH RECLINE, REMOVAL AND INSTALLATION .