Removal And Installation: Installation
CAUTION:
Use care when working with the retaining channel on the bottom of the windshield. If the retaining channel is damaged the windshield will require replacement.
- Position and align and the cowl panel cover (1) onto the vehicle and over the wiper arm pivots (3).
- Insert the rear of the cowl panel cover (2) into the windshield channel (1) fully.
- Seat the front tabs (1) onto the cowl fully.
- Install the fasteners (5).
- Position the foam stuffers down onto the cowl and seat the retainers (2) fully.
- Position the foam tab (1) under the fender fully.
- Install the cowl panel end caps (2) and seat the fasteners (3) into the cowl panel cover fully.
- Insert the cowl panel end cap retainers (1) into the fender edge.
- Install the wiper arms. Refer to ARM, WIPER, REMOVAL AND INSTALLATION .
