Removal And Installation: Installation
NOTE:
The Vehicle Emission Control Information (VECI) label(s) must be in place for the life of the vehicle. When replacing the component to which the VECI label is adhered, a new VECI label must also be adhered to the new component.
- With the help of an assistant, position the hood (1) onto the hood hinges and loosely install the nuts (2).
- Align the hood with the reference mark made previously and tighten the hood hinge to hood nuts to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
- Connect the windshield washer solvent hose.
- Verify proper hood latch operation and fit of hood. Adjust if necessary. Refer to GAP AND FLUSH DIMENSIONS .