Removal And Installation: Removal
- Fold the second row seats into the floor.
- Using a trim stick, lift the front of the scuff plate extension (1) then pull forward to release the tabs (2) and remove.
- For RIGHT side of vehicle open the coat hook (2) and remove the screw (3).
- Using a trim stick or equivalent, remove the C-pillar extension trim panel (1).
- For LEFT side of vehicle remove cover (1) and screw (2) from extension trim (3).
- Using a trim stick or equivalent release the retaining clips on the extension trim and let extension trim hang like image because the left side extension trim panel is molded to the D-pillar trim.
- Move the seat belt height adjuster to the lowest position.
- Using a trim stick or equivalent, remove the bolt cover then the seat belt turning loop bolt.
- Using a small flat bladed tool, remove the screw cover (1) then the screw (2).
- Using a trim stick release the upper front edge of the quarter trim panel from the bottom of the C-pillar trim panel (3).
- Pull at the bottom of the C-pillar trim panel and remove.
