Removal And Installation: Removal

NOTE:

The procedure for replacing the recliner motor assembly is the same for both the 60 and 40 third row power folding seats. The following steps should be performed only on the seat with the inoperative recliner motor assembly.

Remove the effected third row power folding seat. Refer to REMOVAL .
Remove the seat back cushion and cover assembly. Refer to REMOVAL .

Courtesy of CHRYSLER GROUP, LLC
Disconnect the wiring harness connector (1) from the motor.

Courtesy of CHRYSLER GROUP, LLC
Remove the torque rod cap (1).

Courtesy of CHRYSLER GROUP, LLC
Slide the torque rod (1) out from the seat rack.

Courtesy of CHRYSLER GROUP, LLC
Remove the fastener (1) securing the motor to the bracket.
NOTE:
Take care not to disturb the recliner mechanism any more than necessary to remove the motor. Improper part alignment on installation can result in poor seat recliner operation.
Remove the motor.