Removal And Installation

WARNING:

Disable the airbag system before attempting any component diagnosis or service of the front seats, when equipped with front seat air bags. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to follow these instructions may result in accidental airbag deployment and possible serious or fatal injury.

NOTE:

On all models, the front passenger seat bottom contains an Occupant Detection Sensor (ODS) to provide information to the Occupant Restraint Controller (ORC).

When replacing the heated seat pad, the cushion will need to be replaced. Refer to COVER, SEAT CUSHION, FRONT, REMOVAL AND INSTALLATION or COVER, SEAT CUSHION SECOND ROW CENTER, REMOVAL AND INSTALLATION .