Door Gap Adjustment - Fore/Aft
- Check C-pillar and B-pillar for door to aperture gaps and door to door gap. Refer to GAP AND FLUSH DIMENSIONS .
- If adjust gaps require adjustment, mark outline of hinge, loosen center hinge screws as necessary to move center hinge forward or rearward.
- Moving center hinge rearward increases the gap at C-pillar and decreases gap at B-pillar. Moving center hinge forward decreases gap at the C-pillar and increases gap at the B-pillar
- Move center hinge as necessary, and tighten screws.
- Close the door and check the sliding door alignment.
- Verify door alignment, adjust as necessary.
- Tighten center hinge screws to the proper specification. Refer to TECHNICAL SPECIFICATIONS .