Removal And Installation: Removal
WARNING:
Always secure your vehicle by fully applying the parking brake, before activating the Manual Park Release. Activating the Manual Park Release will allow your vehicle to roll away if it is not secured by the parking brake or by proper connection to a tow vehicle. Activating the Manual Park Release on an unsecured vehicle could lead to serious injury or death for those in or around the vehicle.
- Disconnect and isolate the negative battery cable.
- Remove the left cowl side panel. Refer to PANEL, COWL TRIM, REMOVAL AND INSTALLATION .
- Remove the hood release handle (4). Lift the retaining tab (2) and slide the handle forward to remove it from the steering column opening cover.
- Using a trim stick or equivalent, remove the manual park brake release handle (2) from the steering column opening cover (1).
- Remove the strap (3) from the manual park brake release handle.
- Remove the push fasteners (1) at the bottom of the steering column opening cover (2).
- Using a trim stick or equivalent, remove the steering column opening cover and disconnect the wire harness connectors.
