Removal And Installation: Removal
- Remove the front door trim panel. Refer to PANEL, DOOR TRIM, REMOVAL AND INSTALLATION .
- Remove the inner belt weatherstrip (1) from the front door (2).
- Open the access hole plugs (2) and position aside.
- Temporarily install the window switch, connect the negative battery cable and lower the window (1) until the glass fasteners are visible in both access holes (3).
- Remove the window switch assembly, disconnect and isolate the negative battery cable.
- Remove the glass fasteners (1).
- Using a hook-type tool or equivalent, release the lower glass tabs (1) from the regulator lift plates (2).WARNING:
Use care when removing the door glass to prevent breakage. Do not force the glass out of the door. Failure to follow this warning may result in serious injury.
- Carefully rotate the door glass (1) within the window opening (2) and remove the glass from the door through the window opening.
