Doors - Front: Door: Adjustments: In/Out
NOTE:
In/out door adjustment is done by loosening the hinge to door fasteners one hinge at a time and moving the door to the correct position.
- Support the front door with a suitable lifting device.
- Loosen the two bolts (1) that secure the striker (2) to the B-pillar.
- Loosen the four nuts (1) that secure the door hinges to the front door.
- Adjust the front door to the correct position. Refer to GAP AND FLUSH DIMENSIONS
- Tighten the nuts that secure the door hinges to the front door using the sequence shown in illustration to the proper specification. Refer to TECHNICAL SPECIFICATIONS .NOTE:
Make sure the protrusion (3) is orientated towards the interior of the vehicle.
- Tighten the two bolts (1) that secure the striker (2) to the B-pillar to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
