LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Instrument Panel >> Gap Hider, Steering Column Shroud >> Removal And Installation >> Removal

Removal And Installation: Removal

GC0177851Courtesy of CHRYSLER GROUP, LLC
  1. Remove the steering column lower shroud. Refer to SHROUD, STEERING COLUMN, REMOVAL AND INSTALLATION .
  2. Remove the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL AND INSTALLATION .
  3. Remove the screw located in the media hub bezel opening (3).
  4. Open the bin (2) and using a trim stick remove the media hub bezel (3) and set aside.
  5. Remove the instrument cluster bezel. Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL AND INSTALLATION .
    GC0177537Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect the electrical harness connector from the start stop switch (2).
  7. Using a trim stick disengage the left side of the instrument panel center trim piece (1) to gain clearance to remove the gap hider.
  8. Disengage the retaining clips from the gap hider (3) to the instrument panel, and remove.
scientia non olet · About LEMON Manuals