Removal And Installation

REMOVAL 

1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
2. Using a trim stick or equivalent release the rear dome light from the headliner. Disconnect the wire harness connectors and remove lamp from vehicle.

   Courtesy of CHRYSLER GROUP, LLC

3. Release the retaining tabs (1) and remove the retaining bracket from the dome lamp (4).
4. Remove interior camera (3) from the dome lamp (4).

INSTALLATION 

Courtesy of CHRYSLER GROUP, LLC

1. Install the interior camera (3) into the dome lamp (4).
2. Install the interior camera bracket tabs (2) into the slots on the dome lamp (4).
3. Press the camera bracket to the dome lamp (4) to engage retaining tabs (1).
4. Position the rear dome lamp to the headliner. Connect the wire harness connectors.
5. Install the rear dome lamp into the headliner and hand tap to fully engage the retaining tabs.
6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.