LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Door (DDM/PDM) >> Removal And Installation >> Rear >> Removal

Removal And Installation: Rear: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the trim panel from the inside of the sliding rear door. Refer to PANEL, DOOR TRIM, REMOVAL AND INSTALLATION .
    GC0177601Courtesy of CHRYSLER GROUP, LLC
  3. Remove the screws (1, 2) that secure the module to the rear door hardware module carrier.
  4. Remove the rear door control module from the carrier.
    GC0177640Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the electrical connectors (2) from each of the rear door control module (1) connector receptacles and remove from the vehicle.
scientia non olet · About LEMON Manuals