LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Comfort Seat And Wheel (CSWM) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING:

Disable the airbag system before attempting any front seat diagnosis or service. Disconnect and isolate the negative battery (ground) cable and wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to follow these instructions may result in accidental airbag deployment and possible serious or fatal injury.

  1. Disconnect and isolate the negative battery cable.
    GC0177363Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the electrical connectors (2) from the Comfort Seat Wheel Module (CSWM) (1).
    GC0177937Courtesy of CHRYSLER GROUP, LLC
  3. Disengage the retaining tab (1) that secures the rear of the CSWM to the bracket.
  4. Disengage the two front retaining tabs from the bracket and remove the CSWM.
scientia non olet · About LEMON Manuals