LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Explorer Limited, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - 6F35) >> Diagnosis And Testing >> Automatic Transmission >> Diagnostic Routines >> Pinpoint Test D : Shift Solenoid D >> Pinpoint Test D : Shift Solenoid D

Pinpoint Test D : Shift Solenoid D

WARNING: This page is about a different variant/trim than selected.

  1. D1 RETRIEVE AND RECORD ALL DTCS

    • Using the diagnostic scan tool, retrieve all DTCs.

    Are DTCs P0765, P0768, P0769, P0982 and/or P0983 present? 

    Yes  For DTCs P0765, P0768 and P0769, GO to  D2. For DTC P0982, GO to  D5. For DTC P0983, GO to  D7.
    No  GO to Symptom Chart .

  2. D2 CHECK THE SSD CIRCUIT FOR AN OPEN

    • Ignition OFF.
    • Disconnect: Transmission Vehicle Harness C1520A .
    • Disconnect: TCM C1750 .
    • Inspect the connectors for damaged or pushed-out terminals, corrosion, loose wires and missing or damaged seals.
    • Measure the resistance  between.
      Positive Lead Negative Lead
      Pin Circuit Pin Circuit
      C1520A-10 CET08 (BN/WH) C1750-43 CET08 (BN/WH)
    1. GFD35619Courtesy of FORD MOTOR COMPANY

    Is the resistance less than 3 ohms? 

    Yes  GO to  D3.
    No  REPAIR the circuit.

  3. D3 CHECK THE SSD FOR AN OPEN

    • Measure the component side resistance  between.
      Positive Lead Negative Lead
      Pin Circuit Pin Circuit
      10 - 5 -
    1. GFD35620Courtesy of FORD MOTOR COMPANY

    Is the resistance between 4.0 and 7.2 ohms? 

    Yes  INSTALL a new TCM. REFER to Transmission Control Module (TCM) . PROGRAM the TCM with the latest calibration level. PERFORM the Solenoid Body Strategy Download procedure. REFER to Solenoid Body Strategy Download .
    No  GO to  D4.

  4. D4 CHECK THE SSD RESISTANCE

    • Remove the solenoid body leadframe, refer to Solenoid Body Leadframe . Inspect for metal shavings on the exposed metal contacts or other components and clean the solenoid and solenoid body leadframe terminals.
    • Measure SSD resistance  between.
      Positive Lead Negative Lead
      Pin Circuit Pin Circuit
      A - B -
    1. GFD35621Courtesy of FORD MOTOR COMPANY

    Is the resistance between 4.0 and 7.2 ohms? 

    Yes  INSTALL a new solenoid body leadframe. REFER to Solenoid Body Leadframe .
    No  INSTALL a new SSD. REFER to Solenoids .

  5. D5 CHECK THE SSD CIRCUIT FOR A SHORT TO GROUND

    • Ignition OFF.
    • Disconnect: Transmission Vehicle Harness C1520A .
    • Disconnect: TCM C1750 .
    • Inspect the connectors for damaged or pushed-out terminals, corrosion, loose wires and missing or damaged seals.
    • Measure the resistance  between.
      Positive Lead Negative Lead
      Pin Circuit Pin Circuit
      C1520A-10 CET08 (BN/WH) - Ground
    1. GFD35622Courtesy of FORD MOTOR COMPANY

    Is the resistance greater than 10, 000 ohms? 

    Yes  GO to  D6.
    No  REPAIR the circuit.

  6. D6 CHECK THE SSD FOR A SHORT TO GROUND

    • Remove the solenoid body leadframe, refer to Solenoid Body Leadframe . Inspect for metal shavings on the exposed metal contacts or other components and clean the solenoid and solenoid body leadframe terminals.
    • Measure SSD resistance  between.
      Positive Lead Negative Lead
      Pin Circuit Pin Circuit
      A - - Ground
    1. GFD35621Courtesy of FORD MOTOR COMPANY

    Is the resistance less than 3 ohms? 

    Yes  INSTALL a new SSD. REFER to Solenoids .
    No  INSTALL a new solenoid body leadframe. REFER to Solenoid Body Leadframe .

  7. D7 CHECK THE SSD CIRCUIT FOR A SHORT TO VOLTAGE

    • Ignition OFF.
    • Disconnect: Transmission Vehicle Harness C1520A .
    • Disconnect: TCM C1750 .
    • Inspect the connectors for damaged or pushed-out terminals, corrosion, loose wires and missing or damaged seals.
    • Ignition ON.
    • Measure the voltage  between.
      Positive Lead Negative Lead
      Pin Circuit Pin Circuit
      C1520A-10 CET08 (BN/WH) - Ground
    1. GFD35622Courtesy of FORD MOTOR COMPANY

    Is any voltage present? 

    Yes  REPAIR the circuit.
    No  INSTALL a new TCM. REFER to Transmission Control Module (TCM) . PROGRAM the TCM with the latest calibration level. PERFORM the Solenoid Body Strategy Download procedure. REFER to Solenoid Body Strategy Download .
scientia non olet · About LEMON Manuals