Roof Opening Panel Shade Assembly: Installation
NOTE:
The roof opening panel motor(s) must be initialized when repairs are carried out on any part of the roof opening panel system, including whenever:
- the roof opening sliding glass or power shade motor has been removed from the roof opening panel system.
- the roof opening panel glass has been removed from the roof opening panel system.
- the roof opening panel assembly has been removed from the vehicle.
- a new roof opening sliding glass or power shade motor has been installed.
- a new roof opening panel glass has been installed.
- a new roof opening panel assembly has been installed.
Refer to Roof Opening Panel Motor Initialization - Sliding Glass Panel and Refer to Roof Opening Panel Motor Initialization - Shade .
- 1.NOTE: A new shade assembly is already pre-tensioned. If installing a new shade assembly, skip to Step 2.
If installing the original shade assembly and pre-tension was lost during removal, the pre-tension must be set as shown in illustration.
- Using an appropriate tool, push in the shade assembly shaft and turn clockwise 23 turns.
- Pull the shade assembly shaft outward to lock the tension in place.
- 2.NOTE: Make sure to install the felt washers on each end of the shade assembly before inserting into the frame assembly bracket.
Install the shade assembly.
- Install the shade assembly shaft into the slotted bracket and push towards the RH side of vehicle.
- Push in the button on the LH side of the shade assembly, then insert the shade assembly into the LH bracket until it locks in place.
- 3.NOTE: RH side shown in illustration, LH side similar.
Insert the leading edge of the shade rearward until it fully seats and locks in place in the track.
- 4.
Reposition the rear fixed glass panel back and install the 8 rear fixed glass panel screws.- Tighten to 5 Nm (44 lb-in).
- 5.
Install the roof opening panel front sliding glass. Refer to Roof Opening Panel Glass - Front Sliding .
- 6.
Check for correct alignment of the front sliding glass panel and rear fixed glass panel. Refer to Roof Opening Panel Alignment - Front and Refer to Roof Opening Panel Alignment - Rear .

