Trough Assembly: Installation
NOTE:
The roof opening panel motor(s) must be initialized when repairs are carried out on any part of the roof opening panel system, including whenever:
- the roof opening sliding glass or power shade motor has been removed from the roof opening panel system.
- the roof opening panel glass has been removed from the roof opening panel system.
- the roof opening panel assembly has been removed from the vehicle.
- a new roof opening sliding glass or power shade motor has been installed.
- a new roof opening panel glass has been installed.
- a new roof opening panel assembly has been installed.
Refer to Roof Opening Panel Motor Initialization - Sliding Glass Panel and Refer to Roof Opening Panel Motor Initialization - Shade .
- 1.NOTE: Make sure that the springs are installed as shown in illustration before installation of the drain trough.
To install, reverse the removal procedure.
- Check for correct alignment of the front sliding glass panel. Refer to Roof Opening Panel Alignment - Front .
- Initialize the front sliding glass panel motor. Refer to Roof Opening Panel Motor Initialization - Sliding Glass Panel .
