Power-Stow Seat Motor: Removal

NOTE: For component identification and locations, Refer to Seat - Exploded View .

1.

Remove the third row seat. Refer to Seat .

2.

Pry to release the clips and remove the LH and RH outboard pivot covers.

3.

From the RH load floor flapper panel, detach the 2 wire harness retainers and disconnect the 2 electrical connectors. Position the wire harness out of the way.

GFD37585

Courtesy of FORD MOTOR COMPANY

4.

From the LH load floor flapper panel, disconnect the main feed electrical connector.

5.

Remove the 4 load floor panel screws on each side at the back of the cushions.

6.

Pull out to release the retainers and remove the 2 load floor panels.

7.

Release all cushion cover retainers from the cushion frame.

GFD37586

Courtesy of FORD MOTOR COMPANY

8.

Remove the 8 cushion frame-to-pivot tube assembly bolts. Remove the pivot tube assembly with stow motors.