LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Power Locks (Service Information) >> Antenna, Passive Entry >> Removal And Installation >> Sliding Door >> Removal

Sliding Door: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the trim panel from the inside of the sliding door. Refer to REMOVAL .
    GC0177703Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the door wire harness connector (3) from the Low Frequency (LF) antenna (1) connector receptacle.
  4. Remove the fasteners (2) that secure the LF antenna to the door hardware carrier plate.
  5. Remove the LF antenna from the sliding door.